PERFECT EDGE

4264 F Winters Chapel Rd.
Doraville, GA 30360

770-458-7005

Home      About Us      Service-Process     Flooring     Architectural     Industrial     Photos     Contact Us-Links    

INDUSTRIAL USES FOR WATERJET CUTTING BY PERFECT EDGE

Waterjet technology at Perfect Edge is ideal for a variety of industrial uses and applications in multiple industries. Some industrial cutting substrates include:

  • advanced composite materials
  • steel
  • inconel
  • aluminum
  • titanium
  • brass
  • fabrics
  • rubber
  • teflon
  • ceramic

Waterjet cutting produces no mechanical stress and no heat distortion or heat-affected zone on the substrate. Also, waterjet cutting cuts with a narrow kerf, minimizing waste.

Applications such as sprockets, gaskets, flywheels, flanges are some uses for waterjet cutting. Other examples include automotive applications, tooling applications and a multitude of other industrial uses.

 

 

PERFECT EDGE CAPABILITIES AND TOLERANCES

Material Handling

Maximum Weight: 10,000 Lbs

Cutting Area: 6 ft by 12 ft. Larger areas may be accommodated with an additional set-up fee.

Material Thickness: 1/16" to 8" (except carbide and tempered glass.)

Materials which require special setup: glass, acrylic, porcelains, ceramics, certain plastics

Materials that can be cut with the water only head: vinyl, VCT, wood, paper, rubber

Parts at less than 2 inches in size: These must be tabbed to prevent drop out. Tabs can then be broken loose, and the area ground down to clean up the edge. Letters less than 1.5 inches, especially those with a serif font, can not be water-jet cut.

Tolerances

Cut Width
  • abrasive cut widths: 0.04" - 0.05"
  • non-abrasive cut widths: 0.007"-0.013"
Taper
Eliminated in thicker materials by using Dynamic waterjet.
   
© 2010-2012 Perfect Edge. 4264 F Winters Chapel Road   Doraville, GA 30360  Phone: 770-458-7005   All Rights Reserved.   An eFusion Studios Website.